Low-Voltage Dynamic Power Filter Component(BMT)
- Vacuum filling technology: zero leakage, safety and environmental protection.
- Highly reliable insulation property: Low loss, minimal temperature rise, equipped with discharge resistors and an overpressure protection device.
- Installation: 360-degree flexibility installation.
- Overview
- Specification
- Apparence
- Related Products
Product Overview
This product is used in power frequency AC power systems with a rated voltage of up to 1000V, to improve power factor, reduce line losses, and enhance power supply quality.
Technical Specification
Operating Conditions |
Indoor |
Ambient Temperature |
-40~55℃ |
Altitude |
≤4000m |
Rated Voltage |
250~525VAC |
Rated Capacity |
20~50kvar |
Capacitance Tolerance |
-5~+10% |
Tangent of Loss Angle |
≤2.0×10-3 |
Factory Test Voltage |
T-T: 2.15×UN AC 10s |
T-C |
(2×UN) +2000VAC 10s |
Maximum Voltage |
1.15×UN |
Maximum Current |
1.8×IN |
Discharge Characteristics |
Drop to below 75V within 3 minutes after the power is disconnected |
Standard |
GB12747.1/2-2017 / IEC60831.1/2-2014 |
Model Definition
Module model: Rated voltage 480V. AC Rated frequency: 50Hz |
||||||
Models |
Rated Capacitance (QN) |
Rated Capacitance (CN) |
Rated Current (IN) |
Bolt of Bottom |
Dimensions (φD×H) |
Packing Unit (Pcs) |
AMS LC-0.48-20-3 |
20 kvar |
92.1μF×3 |
24.0A |
M12×16 |
Φ86×278 |
6 |
AMS LC-0.48-25-3 |
25 kvar |
115.2μF×3 |
30.0A |
M12×16 |
Φ96×278 |
4 |
AMS LC-0.48-30-3 |
30 kvar |
138.2μF×3 |
36.0A |
M16×25 |
Φ106×278 |
4 |
AMS LC-0.48-40-3 |
40 kvar |
184.2μF×3 |
48.2A |
M16×25 |
Φ126×278 |
4 |
AMS LC-0.48-50-3 |
50 kvar |
184.2μF×3 |
48.2A |
M16×25 |
Φ136×278 |
4 |
Module model: Rated voltage 280V. AC Rated frequency: 50Hz |
||||||
Models |
Rated Capacitance (QN) |
Rated Capacitance (CN) |
Rated Current (IN) |
Bolt of Bottom |
Dimensions (φD×H) |
PackingUnit (Pcs) |
AMS LC-0.28-15-3YN |
15 kvar |
203.0μF×3 |
17.9A×3 |
M12×16 |
Φ86×235 |
6 |
AMS LC-0.28-30-3YN |
30 kvar |
406.0μF×3 |
35.7A×3 |
M16×25 |
Φ106×278 |
4 |